CES and MINT Firmware - To what infinet Radio Model.

Hi Everyone,

Does any one Knows or has a list of models where to upgrade the CES and MINT Firmwares.? to what  Infinet radio models

MINT (1.XX versions of firmware)

    - What Infinet Radio Models?

    - What Infinet Radio Models?

   - What Infinet Radio Models?

   -What Infinet Radio Models?

-What Infinet Radio Models?

-  What Infinet Radio Models?

CES (1.XX versions of firmware for equipment used with E1 IDU equipment)

-What Infinet Radio Models?

-What Infinet Radio Models?

-What Infinet Radio Models?

-What Infinet Radio Models?

Thank you.

Hi !you should check which platform is your radio. Check "maintentance" web admin page, or "sys ver" on the CLI.
I do not have knowledge of H01, 02, platform (maybe obsolete), but I can tell you that:

H08: is the latest MIMO gigabit ethernet port (Mmx, Omx)

H06: is the MIMO Gigabit ethern port gears (was intermediate between H05 and H08): model Mm/Om with Gigabit ethernet ports

H05: is the MIMO fast ethernet port (single or double), Mm, Om, Mme, Ome, Sm, Lm, Smc, Lmc...

H07: is the NON-MIMO 54Mbps gears: O, M, L, S...

Cheers
Andrea

Hello Andrea,

Thank you for the info..

Cheers!

Not at all
I should correct myself: "H06: is the MIMO Gigabit ethern port gears (was intermediate between H05 and H08): model Mm/Om with Gigabit ethernet ports"

H06 platfrm is Mmg and Omg models, not Mm/Om

sorry
Andrea

Hi Andrea,

I'd like to add the following:

H07 is also used in Inflink 2x2 lite(Sm and Lm units) and InfiMan 2x2 subscriber units(Smc and Lmc), but not the H05 as you mentioned above.

Best regards,

Dmitry Moiseev

Sure! I'm sorry.
By the way the best method to check which kind of FW must be loaded on a radio, is to read the current FW in the radio itself (from web "maintenance" section or the sys ver command under the CLI).
Moreover, every time you upload a new FW it'll be checked and warn you if you used a wrong file

Thank you for your clarification
Andrea