Personal tools
Log in


Forgot your password?
New user?
You are here: Home General Discussions How can I monitor my Infinet wireless devices?

How can I monitor my Infinet wireless devices?

Up to General Discussions

How can I monitor my Infinet wireless devices?

guepsi guy
July 31. 2011

Hello!

I want to monitor my Infinet wireless devices. I use "cacti" to monitor traffic on these devices; but the problem is that i have no graph displayed.

The only results i have since i have started with cacti is these shown below which prove that the snmp communication with the devices works fine. But i want to monitor the traffic and still now ,  i don't have a suitable solution to realize this.

Please if someone could help me (even by advising me on a free software that can permit me to monitor the trafic, the time response, the power emitted of the Infinet wireless devices) i will be very happy. 

Best Regards.

 

LEKIE_serveur (172.16.3.1) SNMP Information
System:Infinet Wireless Router R5000H07S01-MINT, WANFlex 1.68.0
Uptime: 391734500 (45 days, 8 hours, 9 minutes)
Hostname: YDE-FEBE-PTP-WBR01
Location: RINGO-LEKIE
Contact: support@ringo-group.com

Ping Results
UDP Ping Success (2.48 ms)

Re: How can I monitor my Infinet wireless devices?

Vladimir Vasilenko
August 02. 2011
The MIBs can be found on our ftp site - ftp://ftp.infinet.ru/pub/Firmware/MIBS/

InfiNet devices support SNMP v1 and 3. You can get an example of SNMP configuration in the INMS documentation  ftp://ftp.infinet.ru/pub/INMS/INMS%20Installation%20Guide.eng.pdf and the description of the SNMP configuration commands in the WANFlex OS Manual  ftp://ftp.infinet.ru/pub/DOC/CD_5000/MINT/English/Docs/wanflex.pdf

If you have any additional questions - don`t hesitate to ask.

Regards, Vladimir

 

p.s. we have templates for cacti

I will send you them later ....

 

Previously guepsi guy wrote:

Hello!

I want to monitor my Infinet wireless devices. I use "cacti" to monitor traffic on these devices; but the problem is that i have no graph displayed.

The only results i have since i have started with cacti is these shown below which prove that the snmp communication with the devices works fine. But i want to monitor the traffic and still now ,  i don't have a suitable solution to realize this.

Please if someone could help me (even by advising me on a free software that can permit me to monitor the trafic, the time response, the power emitted of the Infinet wireless devices) i will be very happy. 

Best Regards.

 

LEKIE_serveur (172.16.3.1) SNMP Information
System:Infinet Wireless Router R5000H07S01-MINT, WANFlex 1.68.0
Uptime: 391734500 (45 days, 8 hours, 9 minutes)
Hostname: YDE-FEBE-PTP-WBR01
Location: RINGO-LEKIE
Contact: support@ringo-group.com

Ping Results
UDP Ping Success (2.48 ms)

 

Document Actions